Entwicklungstool Zubehör (26 Artikel)

Der Flasher RL78 Adapter wandelt den 20-poligen Standard-Steckverbinder für J-Link in 0,1 Zoll in einen 14-poligen Standard-E1-Steckverbinder nach Renesas-Definition um. Bitte beachten Sie, dass di...

Zubehör-Typ = Adapter The SEGGER J-Link 14-Pin TI Adapter converts the 20-pin, 0.1 inch standard connector to a 14-pin, 0.1 inch Texas Instruments connector.Includes a 14-pin TI cable

Zubehör-Typ = Adapter The SEGGER J-Link RX FINE Adapter converts the 20-pin, 0.1 inch standard connector to a 14-pin, 0.1 inch RX FINE connector. Includes the necessary cable.Package includes: .1″ ...

Zubehör-Typ = Adapter The SEGGER J-Link 2mm Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 20-pin, 2mm pitch connector.The J-Link 2mm Adapter is a 1:1 adapter

Zubehör-Typ = Adapter The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20-pin 0.1″ socket towards the J...

Zubehör-Typ = Adapter The SEGGER J-Link SiLabs C2 Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 10-pin, 0.1 inch pitch SiLabs C2 connector.Includes 10 pin ribbon cable

Zubehör-Typ = Adapter The SEGGER Adapts from the standard J-Link 20-pin 0.1″ target connector to Xilinx 14-pin 2 mm connector (comp. Platform Cable USB II).Package includes: 14-pin 2mm ribbon cable

Zubehör-Typ = Adapter Zum Einsatz mit = 14-polige 0,1-Zoll-JTAG-Steckverbinder The SEGGER Adapter for PPC targets with 14-pin 0.1″ mating JTAG connectors.Includes a 14-pin ribbon cable

Zubehör-Typ = Adapter Segger Mikrocontroller-AdapterDer Segger Microcontroller-Adapter ist ein J-Trace MICTOR 38-Adapter, der mit dem 38-poligen MICTOR-Steckverbinder verbunden wird. Er verbindet G...

Zubehör-Typ = Adapter The SEGGER J-Link Mictor 38 Adapter connects the standard 20-pin 0.1″ J-Link interface to the 38-pin Mictor interface. The pinout follows the single target connector pinout sp...

Zubehör-Typ = Adapter Zum Einsatz mit = Arty The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams.The ARTY board provides ...

Zubehör-Typ = Adapter Zum Einsatz mit = Flasher ATE, Flasher Portable PLUS, Flasher PRO The SEGGER Flasher STM8 Adapter converts the standard J-Link 20-pin 0.1″ connector to the SWIM connector and ...

Zubehör-Typ = Adapter Zum Einsatz mit = Intel FPGA JTAG The SEGGER Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin 100-mil Intel FPGA JTAG connector providing debug acces...

Zubehör-Typ = Adapter Zum Einsatz mit = J-Link The SEGGER J-Link 6-pin Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming header....

Zubehör-Typ = Adapter Zum Einsatz mit = J-Link-Debug-Tastkopf The SEGGER J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integ...